Description

365AstroBits Precision Tripod Level Adjuster (Metal Leveling Base) for Seestar

Three tuning knobs enable fine level adjustment, making this device a nice addition to your ZWO Seestar or similar smart telescope or other photography or astro photography equipment.

It featurs a standard 3/8″ male photo thread at the top to attach your Seestar or other device and a standard 3/8″ female thread at the bottom to secure it into the top of a tripod.

A non-slip rubber pad provides safe and wobble free attachment of your device.

Note about the colours: you will see thatthere are some variations between the red colours on our images. Partially it depends on the illumination and partially on your computer screen and partially on the temperature of red anodising process, hence there might be differences between the various batches. Please check out the image on which I hold it in my hand and that shows nicely the colour of the current batch as of February 2024. Zoltan T. director

Specifications

• Material: Black anodised aluminum alloy top and bottom plates; Red anodised aluminium alloy knobs
• Size: Approx. 46 mm high (without the height of the male screw thread) and up to 86mm wide (depending on where you measure it
• The outer diameter of the rubberised pad is 56mm. The min diameter of the top platform is appr. 68mm
• Max Load: appr. 15 kg / 33 Lbs
• Screw: 3/8″ Male Top and 3/8″ Female Bottom Socket
• Weight: 202g

Please note, some websites would state that this device can offer +/- 5 degrees compensation, but if it was true then you could compensate for a 10-degree inclination, however you cannot.
We measured it and it provides a 5-degree adjustment from the highest position on one side to the lowest on the other side which is about the same as +/-  2.5-degrees if you are in middle position on one side.

This should be more than sufficient for precisely leveling your Seestar or other equipment.